加入收藏 | 设为首页 | 会员中心 | 我要投稿 银川站长网 (https://www.0951zz.com/)- 云通信、基础存储、云上网络、机器学习、视觉智能!
当前位置: 首页 > 服务器 > 搭建环境 > Linux > 正文

linux中shell test 条件表达式解说

发布时间:2023-08-02 12:50:44 所属栏目:Linux 来源:
导读:shell test 条件表达式对于很多的开发者来讲都是不很理解了,下文我来为各位介绍一些关于linux中shell test 条件表达式的说明与例子.条件表达式("CONDITIONAL EXPRESSIONS")条件表达式用于 [[ 复合命令以及内建命令 t

shell test 条件表达式对于很多的开发者来讲都是不很理解了,下文我来为各位介绍一些关于linux中shell test 条件表达式的说明与例子.

条件表达式("CONDITIONAL EXPRESSIONS")

条件表达式用于 [[ 复合命令以及内建命令 test 和 [ 中,用来测试文件属性,进行字符串和算术比较,表达式使用下面的单目或二进制操作构造,如果某操作的任何 file 参数的形式是.

文件符号:在info bash里的第“6.4 Bash Conditional Expressions”节里开头有一句话说明了shell条件判断的二个机制:

Conditional expressions are used by the `[[' compound command and the

`test' and `[' builtin commands.

机制一:内置(builtin)的函数test(运算符[]),此部分完整的说明,可查看“4.1 Bourne Shell Builtins”

机制二:[[]],条件结构关健字,具体可查看“3.2.4.2 Conditional Constructs”

test跟[]是一回事,只不过一个以函数的形式,一个以成对操作符的形式出现,test包含6.4节条件表达式的表达形式,是函数就有参数,test对1、2、3.。。6等多个参数的判断分别进行定义,而[[]],大部分的功能跟[]是一样的,可以简单理解成[]的扩展,但对于参数的判断定义上,比test有更完整的定义,不容易出现[]中的错误,比如在-eq比较的右操作符中,[]要求右操作符不为空,否则报错,返回2,而[[]]则不会.

[root@localhost tmp]# [ 1 -eq  $a ]      

+ '[' 1 -eq ']' 

-bash: [: 1: unary operator expected 

[root@localhost tmp]# echo $?       

+ echo 2 

[root@localhost tmp]# [[ 1 -eq  $a ]] 

+ [[ 1 -eq '' ]] 

[root@localhost tmp]# echo $?         

+ echo 1 

这也是很多程序员喜欢用[[]]的原因,不容易出错,test的表达能力,[[]]扩展了二个功能.

1:pattern match,通配符匹配,采用双等号“==”

2:regex match,正则匹配,采用“=~”运算符号

首先说明下通配符匹配:先说明一下[]里的==运算,[]也包括==比较,用于字符串相等比较,同样,==号在这里也不允许右操作符为空,否则报错.

[root@localhost tmp]# [ "abc" == $a  ]   

+ '[' abc == ']' 

-bash: [: abc: unary operator expected 

解决办法是加个引号:

[root@localhost tmp]# [ "abc" == "$a"  ] 

+ '[' abc == '' ']' 

而[[]]里的==,在3.2.4.2 里有介绍:

When the `==' and `!=' operators are used, the string to the right 

     of the operator is considered a pattern and matched according to 

     the rules described below in *Note Pattern Matching::。。。 

Any part of the pattern may be quoted 

     to force it to be matched as a string. 

这一段说明至少要注意二点:

1:[[]]里的==运算符,把所有右操作符都看做是一个pattern,==实际上不只是简单字符串比较,而是pattern match,即通配符匹配,具体的规则可以参考

3.5.8.1 Pattern Matching

2:最后一句:引号可以直接定义字符串,在3.5.8.1里也有一句话:The special pattern

characters must be quoted if they are to be matched literally.

即:pattern特殊字符为字符在引号里取消特殊定义

这也就能解释下边的二个例子的差别了:

[root@localhost tmp]# set -x 

+ set -x 

[root@localhost tmp]# [[ abc == a*c ]] 

+ [[ abc == a*c ]] 

[root@localhost tmp]# echo $?          

+ echo 0 

[root@localhost tmp]# [[ abc == "a*c" ]] 

+ [[ abc == /a/*/c ]] 

[root@localhost tmp]# echo $?            

+ echo 1 

另外需要留意下:在[[里,文档中提到:

Word splitting and filename expansion are not 

     performed on the words between the `[[' and `]]'; tilde expansion, 

     parameter and variable expansion, arithmetic expansion, command 

     substitution, process substitution, and quote removal are 

     performed. 

也就是说,在[[里,不进行bash命令解析中的“文字分割Word splitting ” 和 “文件名扩展filename expansion ”但还是进行了 “~符号扩展,参数和变量扩展,算术扩展,命令替换,进程替换,引号去除”,所以不必担心上边例子中,a*b是否会扩展成目录下的文件名.

至于=~正则匹配,就没有什么特别是的了,右操作数直接定义成一个正则式子即是,这里正则的引号可用可不用(不能用/),因为在 “quote removal ”环节,对非扩展出来的引号做了去除处理,实际上有加引号与不加引号是一样的结果.

[root@localhost tmp]# [[ abc =~ 'ab*c' ]]   

+ [[ abc =~ ab*c ]] 

[root@localhost tmp]# echo $?             

+ echo 0 

[root@localhost tmp]# [[ abc =~ "ab*c" ]]   

+ [[ abc =~ ab*c ]] 

[root@localhost tmp]# echo $? 

+ echo 0 

[root@localhost tmp]# [[ abc =~ ab*c ]]   

+ [[ abc =~ ab*c ]] 

[root@localhost tmp]# echo $?           

+ echo 0  --Cuoxin.com 

[root@localhost tmp]# [[ abc =~ /ab*c/ ]] 

+ [[ abc =~ /ab*c/ ]] 

[root@localhost tmp]# echo $?             

+ echo 1 

例子:

[root@LAMP test]# help test 

test: test [expr] 

    Evaluate conditional expression. 

    Exits with a status of 0 (true) or 1 (false) depending on 

    the evaluation of EXPR.  Expressions may be unary or binary.  Unary 

    expressions are often used to examine the status of a file.  There 

    are string operators as well, and numeric comparison operators. 

    File operators: 

      -a FILE True if file exists. 

      -b FILE True if file is block special. 

      -c FILE True if file is character special. 

      -d FILE True if file is a directory. 

      -e FILE True if file exists. 

      -f FILE True if file exists and is a regular file. 

      -g FILE True if file is set-group-id. 

      -h FILE True if file is a symbolic link. 

      -L FILE True if file is a symbolic link. 

      -k FILE True if file has its `sticky' bit set. 

      -p FILE True if file is a named pipe. 

      -r FILE True if file is readable by you. 

      -s FILE True if file exists and is not empty. 

      -S FILE True if file is a socket. 

      -t FD   True if FD is opened on a terminal. 

      -u FILE True if the file is set-user-id. 

      -w FILE True if the file is writable by you. 

      -x FILE True if the file is executable by you. 

      -O FILE True if the file is effectively owned by you. 

      -G FILE True if the file is effectively owned by your group. 

      -N FILE True if the file has been modified since it was last read. 

      FILE1 -nt FILE2  True if file1 is newer than file2 (according to 

  modification date). 

      FILE1 -ot FILE2  True if file1 is older than file2. 

      FILE1 -ef FILE2  True if file1 is a hard link to file2. 

    String operators: 

      -z STRING      True if string is empty. 

      -n STRING 

  STRING      True if string is not empty. 

      STRING1 = STRING2 

True if the strings are equal. 

      STRING1 != STRING2 

True if the strings are not equal. 

      STRING1 < STRING2 

True if STRING1 sorts before STRING2 lexicographically. 

      STRING1 > STRING2 

True if STRING1 sorts after STRING2 lexicographically. 

    Other operators: 

      -o OPTION      True if the shell option OPTION is enabled. 

      ! EXPR  True if expr is false. 

      EXPR1 -a EXPR2 True if both expr1 AND expr2 are true. 

      EXPR1 -o EXPR2 True if either expr1 OR expr2 is true. 

      arg1 OP arg2   Arithmetic tests.  OP is one of -eq, -ne, 

-lt, -le, -gt, or -ge. 

    Arithmetic binary operators return true if ARG1 is equal, not-equal, 

    less-than, less-than-or-equal, greater-than, or greater-than-or-equal 

    than ARG2. 

    Exit Status: 

    Returns success if EXPR evaluates to true; fails if EXPR evaluates to 

    false or an invalid argument is given. 

    -a file 

相关参考:

如果 file 存在则为真。 

-b file 

如果 file 存在且为块设备则为真。 

-c file 

如果 file 存在且为字符设备则为真。 

-d file 

如果 file 存在且是一个目录则为真。 

-e file 

如果 file 存在则为真。 

-f file 

如果 file 存在且为普通文件则为真。 

-g file 

如果 file 存在且是设置组ID的 (sgid) 则为真。 

-h file 

如果 file 存在且为符号链接则为真。 

-k file 

如果 file 存在且设置了 ‘‘sticky’’ 位 (粘滞位) 则为真。 

-p file 

如果 file 存在且是一个命名管道 (FIFO) 则为真。 

-r file 

如果 file 存在且可读则为真。 

-s file 

如果 file 存在且大小大于零则为真。 

-t fd  如果文件描述符 fd 是打开的且对应一个终端则为真。 

-u file 

如果 file 存在且是设置用户ID的 (suid) 则为真。 

-w file 

如果 file 存在且可写则为真。 

-x file 

如果 file 存在且可执行则为真。 

-O file 

如果 file 存在且为有效用户ID所拥有则为真。 

-G file 

如果 file 存在且为有效组ID所拥有则为真。 

-L file 

如果 file 存在且为符号链接则为真。 

-S file 

如果 file 存在且为套接字则为真。 

-N file 

如果 file 存在且上次读取后被修改过则为真。 

file1 -nt file2 

如果 file1 比 file2 要新 (根据修改日期),或者如果 file1 存在而 file2 不存在,则为真。 

file1 -ot file2 

如果 file1 比 file2 更旧,或者如果 file1 不存在而 file2 存在,则为真。 

file1 -ef file2 

如果 file1 和 file2 指的是相同的设备和 inode 号则为真。 

-o optname 

如果启用了 shell 选项 optname 则为真。参见下面对内建命令 set 的 -o 选项的描述中的选项列表。 

-z string 

如果 string 的长度为 0 则为真。 

-n string 

string 如果 string 的长度非 0 则为真。 

string1 == string2 

如果字符串相等则为真。= 可以用于使用 == 的场合来兼容 POSIX 规范。 

string1 != string2 

如果字符串不相等则为真。 

string1 < string2 

如果 string1 在当前语言环境的字典顺序中排在 string2 之前则为真。 

string1 > string2 

如果 string1 在当前语言环境的字典顺序中排在 string2 之后则为真。 

arg1 OP arg2 

OP 是 -eq, -ne, -lt, -le, -gt, 或 -ge 之一。这些算术二进制操作返回真,如果 arg1 与 arg2 分别是相等,不等,小于,小于或等于,大于,大于或等于关系 。  Arg1   和 

arg2 可以是正/负整数。

(编辑:银川站长网)

【声明】本站内容均来自网络,其相关言论仅代表作者个人观点,不代表本站立场。若无意侵犯到您的权利,请及时与联系站长删除相关内容!

    推荐文章